| [Start] | [Questions ] | [ Injector] | [Ignition] | [Triger] | [Display] | [Wbo2] | [Config] | [Table] |
Display
Q: Which resistors did you use? Is this similar to the green LCD screens?
- Connect a 2k2 ohm resister between pin 1 and pin 3 Contrast -
- Connect a 100 ohm resister between bin 2 and pin 15 Backlight+
- Connect pin 1 and pin 16 Backlight-
- If the display is unclear trial to fit a higher value of the resisters
That should work…
see also http://www.vems.hu/wiki/index.php?page=GenBoard%2FBuildProcedures%2FLCDconnect
