Audi S2 Trigger problems.
v3/10045 was ordered as "custom Audi 3B ecu."
'''Need to first get overview of the project, so please collect information on thematical page(s), link all related page
- MembersPage/PeterJensenGeneralQuestion
- seems to be related, but mess, cleanup and move related info to subsection here, or linked subpage
Audi 3B v3/10045 (old, after some time lambda nernst or pump failed, diag inconclusive (send back after measurement, take care of [addr]
"custom Audi 3B ecu."
- 1: 5 output for logic level vag coils. 50 cm of wire from the ecu to a Econoseal 10 pin in the end of wire´s.
- 2: 2 x knock
- 3: output to carbon canister valve N80 55p pin 5 (please set it up in Vt)
New Audi 3B box v3/18515 arrived today thanks for that.
Made the config file and tried to start.
The new box have trigger errors (less pre. trigger) so NO GO.
What is changed in the box regard to box 10045?
Never had any trigger problems with box 10045.
We compare your project notes (from old and new) and measurements, and look up benchtest records.
Trigger measurements with v3/10045
Trigger type: auditrigger (?)
- DC measurements
- primtrig
- sectrig crankhome VR
Trigger measurements with v3/10045
Trigger type: auditrigger (?)
- DC measurements
- primtrig
- sectrig crankhome VR
Scope is best, but at least DVM DC measurements required.