The car is a Mazda RX3-1973 with a 13b engine that is being built by a friend. The current engine is balanced, has lowered compression, is street-ported and has new hurley apex-seals which is going to be used at first. This is accompanied by a Garrett turbocharger to get some more power from the available 1.3 liter.
Right now the engine is fitted with 2 x Weber 50 carburettors and a distributor from a newer Mazda with built-in ignition-coil drivers.
My part of the project is to hopefully adapt the VEMS firmware to work with two separate igntion tables for use with the wankel-engine.
I've divided this into subpages for better readability,
- MembersPage/PelleWallberg/PCBasedTimingTest
- MembersPage/PelleWallberg/TriggSetup
- MembersPage/PelleWallberg/IgnitionSetup
Some pictures of the setup so far
