Having a slight issue with customers car (car is in Florida). Works fine other than the trigger errors at idle speed or so. Temporary error just at the start of cranking is small thing, but occasionally it shows trigger error (tooth lenth bad) during idle and from the trigger log it seems that secondary trigger (it reads starter gear ring as primary and single teeth on the flywheel as secondary) trigger the primary. Or what it is?
Attached config and triggerlog, would really appreciate any help.
http://www.vems.hu/files/PeepPaadam/Bob_911_3.2.vemscfg
http://www.vems.hu/files/PeepPaadam/v3.3_u012186-2016-03-25-10.50.23_911.triggerlog