Primary Trigger
terheletlen feszültség: 2,85 V
1Kohm-os ellenállással 284 mV
a polaritás megfeleli
http://data.hu/get/2745756/v3.3_n003213-2010.07.10-19.02.09_papp.vemscfg.html
We concluded that p259 was likely damaged during the install
- p259 worked before (obviously tested before sendout, but output also worked in the field)
- p259 output (that was designated as fuel pump relay originally in this install) does NOT work now
- no RPM signal (bench shows RPM with same config)
Output collision ! Change fuel pump output (now an injector channel is selected for it) to NOT collide with an injector !!! Use injgroup 4..7 (NOT 0..3 = A..D)
the p59 repaired sucessfully. but we dont have trigger signs.
http://data.hu/get/2763275/v3.3_n003213-2010-07-16.21.17.24.triggerlog.html
anybody idea?