Hi all!
My project is an Aprilia RSV1000 dragbike. New Cams (320deg/11,5mm), bigger valves, headporting, 2 injector/port, 36-1 triggerwheel, wasted spark cop, E85 fuel, custom exhaust.
It's working, not just in the head.
Now I need wheel speed
I wondered if i can use the senondary trigger lm1815 and vr for wheel speed.
- yes. If sectrig is disabled, than you don't even need to disconnect the sec lm1815 from the CPU, can connect to ps2 clk directly
- but of course disconnecting from the CPU is very easy (unsolder the solderblob at the bottom under the injector FETs)
- [VR to HALL] is also an option
PG
Thanks!
Working!