V3 Sn:11451
Ordered with 6EGT input + analog input multiplexer.
A channel connected to MCP3208 ch6
B channel connected to MCP3208 ch7
ECU input:
A ch0 = pulled up - Launch and Shift-cut button
A ch1 = no pulled up - Fuel pressure
A ch2 = pulled up - ALS switch
A ch3 = no pulled up - NC
B ch0 = pulled up - Oil temp
B ch1 = no pulled up - NC
B ch2 = pulled up - Program switch
B ch3 = no pulled up - NC
Line0 connected to low current out ch2
Line1 connected to low current out ch3
All Analog input multiplexer inputs 0-5V (protected)
I need one more pulled up channel for a pressure sensor(not 3pin sensor). example to B ch1. How can i use this channel pulled up?