We would like to use a VEMS V3 for dataloging and data forwarding via CANBUS system to another Engine Control unit. The ECU is a DTA.
Some information about the dragster.
Audi V6 12V engine
Borg warner S400 turbo
Methanol fuel
dragautomata gearbox
The plan for VEMS:
6xEGT with outside amplifier with 0-5V signal into Analog input multiplexer.
Turbo speed sensor with a little electronic which can send 0-5V signal to VEMS/Datalogger.
Exhaust Pressure Sensor.
2xWBO LSU 4.9
G-power sensor. 2way. 0-5V
Wheel speed sensor
Oil pressure
Oil temp
Fuel pressure
RPM signal
- Is it possible to use the DTA RPM signal output(non pulled up to 5V or 12V) to get RPM value in VEMS? If primary trigger type=coil type....
And use the vems for PWM controlled N2O system from MAP/RPM tables
Here are some specs about DTA CAN stream.
http://www.dtafast.co.uk/download_files/Manuals/S%20Series%20CAN%20Stream%20Generic.pdf
We want to see all of the VEMS ECU's values in the DTA's log.
Is it possible?
Norbi