Ignition details - please fill in
BEWARE: Please do NOT disable ignition outputs while engine is running. It is not allowed (VT says in red: "must not be changed while engine is running"; if configuration of certain ignout is changed at an unlucky time, while dwell for that out is active, it might stay on and burn fuse or transformer if the fuse protection is ineffective).
Removing ign fuse or switching off the +12V (or low side ) of certain coil could result in preignition (if switched off when dwell was active), also harmful.
'''I checked the ignition cables and i found a damage on a plug, close to the receptacles which was close to the engine harness. I changed this cable and it seems that the missfire/trigger error left off.
