I have few questions about setting up the ignition system for the 1uz.
the 1uz has 4 vr sensors,
1 camshaft angle sensor left bank 1 tooth G2
2 vvt Sensor on each intake camshaft 3 lobe VVL VVR
1 crankshaft angle sensors - 32-2 NE
NE+ -> EC36-pin27 VR+
NE- -> EC36-pin26 VR-
G2+ -> EC18-pin12 VR+
G2- -> EC36-pin26 VR-
VVL+ -> SCL Pin
VVL- ->
VVR+ -> SDA Pin
VVR- ->
Should I use the https://shop.vems.hu/catalog/hall-p-162.html for VVL and VVR?