Hi.
This is the build log of my Volvo 960 T5 build.
The car originally had a 2.5 straight 6 lump. I'm swapping a 2.3L inline 5 turbo from a 850 Turbo.
Engine/drivetrain mods so far:
- rebuilt engine by previous owner
- cams out of a N/A engine. longer lift, more overlap.
- custom intake manifold
- kevlar clutch & 850R pressure plate
In the 850 I was running a modified RICA tune.
Unfortunately the stock engine managent system can not be used after putting the engine into the 960. In the 850 the ignition is distributor type and the distributor cap doesn't fit between the engine and the firewall.
I've already fabricated a "star" shaped distributor (850 distro cap cut up and "re-worked" + 940 2.3 i4 turbo distributor cap) but I don't trust that... it is a custom made distributor cap.. enough said...
That is why I'm turning to the VEMS direction. Modifying the stock motronic system is complicated and there is no 100% working solution. VEMS solves every problem (EMS vise) I have to deal with at the moment.
Coil on plug ignition instead of the distributor style
I can fit any kind of injectors.
The whole build is documented on the turbobricks forum:
http://forums.turbobricks.com/showthread.php?t=277359
I'm going to concentrate on engine management side of the build here. Wiring, setup, tune, logs.
Peter