Members Page/Nanassy Peter/SKODA - VEMS wiki www.vems.hu

MembersPage/NanassyPeter/SKODA (2005-10-12 15:44:01)

Please write in English.

Trigger settings for the 1.8L audi 4cyl 20valve engine

60-2 crankwheel,
edge: rising
type:Multitooth
Filtering: disabled
TDC: ...
Number otow:58
trigger tooth:2
next trigger tooth: 30
crank min period: 1800 usec

Please start from a reasonable config, eg. MembersPage/MarcellGal/EngineSwap

Otherwise you are likely to have many BAD values. (the angular width is OK in my config).

h tÃ¡bla

ignition settings

inj settings, low or high impedance? measure!

EGO settings,WB settings

uint8_t hybrid_rpm_a; // VE mode:alpha-n (TPS) below [*100] RPM
uint8_t hybrid_rpm_m; // VE mode:speed density (MAP) above [*100] RPM

coolant bin adjustment ?

MegaTune might not allow it. You can adjust from menu, but it's almost never needed. If you want higher max range, thermfactor table is easy to change: temperature related config values will be nonstandard, and LCD and MegaTune readings will be cheated.

---

Vajon hogyan tudom megÃ¡llapitani a skodaban levo trafo labkiosztasat???