Installing V3.2 on Fiat Uno 1.6l
setup :
- 4 injectors (189.2 cc/min)
- wasted spark ignition
- 60-2 multiteeth on crankshaft
- onboard MAP-sensor
- TPS sensor fitted
Anyone has good starting config.txt for this setup?
- mine seem to be close: MembersPage/MarcellGal/EngineSwap
- except you likely want alternate=13 to use 4 banks instead of 2
- shorten cwl and cwh (to appr. half) if using 4 banks (if using alternate=13 instead of 03, bit4=1 means fire all inj channels simultaneously at cranking)
- verify and adjust req_fuel
- copy the WBO2 part from elsewhere, Marcell's nernst hardware has an amplifier bypassed!
- Can i use WBO2 for this project?
- you are licenced to use WBO2 code with any boards / ECM bought from WebShop
I had a look at your config.txt and want to know if i understand well:
trigger_tooth = 10 : spark is scheduled on 16th tooth after missing tooth?
ign_tdcdelay = 70 : (112 dec) is this in 0.25°? Is this position of first tooth after missing tooth or position of trigger_tooth?
If first tooth is on 112°, and trigger_tooth = 16, then spark is scheduled at 112-16*6 = 16° BTDC. Isn't this too late?
Where can i find description of divider?