Want to install on Honda S2000
Trigger setup is as follows :
1 crank VR with 12 even spaced teeth
MembersPage/PhatBob - I understood that the crank trigger was 12+1 (12 even spaced teeth with one extra tooth in between on tooth pair)
MembersPage/MustangStef - I double checked and it is 12 even spaced teeth, camshafts as below. Any ideas how to process this?
1 VR on inlet camshaft with 4-1 teeth
1 VR on exhaust camshaft with 4-1 teeth
Is it possible to use the crank sensor together with one of the cam sensors?
If so, how should i configure trigger settings?