My daily driver, Audi S6 avant -95, 2.3L inline 5, 20 valve turbocharged engine (AAN).
Going to install VEMS to empty Motronic box as direct replacement of original ECU (see PlugAndPlayMotronic). Extra wiring is needed only for WBO2.
My config.txt and tables.txt:
15.06.2005
Flying wire adaptor for basic functionality from genboard (v3.2) towards motronic connector is almost finished.
- 5x high-Z injectors
- 5x ignition coils (with power output stages)
- BoostControl solenoid aka WGFV
- Fuelpump relay
- 3x trigger signals (2x VR + 1x hall) to AudiTrigger helper board
- supply voltages to board itself and 5V to hall, TPS
Pictures and more info will follow..