This car is a 4wd Mazda 323. It is stripped with a cage, 2 seats, steering wheel, shifter, pedals and not much else. The powerplant is a B6T (internally stock) with a number of external modifications. One of my tasks in this project was to re-wire the engine system and give it a complete engine management system.
MembersPage/MichaelRichards/Projects/TonyGTX/Wiring has details on how the wiring is done.
---
Problems.
For some reason the engine just dies as soon as it leaves the cranking PW. I can set the cranking threshold high enough that it will idle (very rich).
As soon as I exceed this RPM the engine dies. I have a feeling it has to do with my injector settings.
req_fuel=09
injopen=1B
battfac=10
injocfuel=02
injrampup_battfac=04
injpwm=ff
injpwmt=ff
injpwm6=ff