Trying to get my Nissan 200sx to get startet with VEMS after it went dead.
Motor:
CA18DET
CYLINDER: 4
Head: 16 valve
Trigger: 24/1 CAS
FW: 1.1.50
Map sensor: 400Kpa
Config: http://www.vems.hu/files/MembersPage/MaxLarsson/config/config.txt
Tables: http://www.vems.hu/files/MembersPage/MaxLarsson/config/tables.txt
The problem:
I'm having trouble geting the sensors to work. I have some kinde of earthing problem that im trying to fix.
I have tested my vems box in a friends car but the same error accured. Removed the P259 circut but didnt help.
The main problem now is that my sensor dosn't giva a reading.
TPS=100%
CLT= -40
IAT= -40
Map=405Kpa
RPM meter is working.
Ignition is dead.
Have tride bothe the EC36 33 34 35 36 outputs for the ignitions and the Ec18 Stepperoutput but theres no reaction of life.
The coils are working when manualy grouning them fast.
The injectors dosn't work.
Theres 12V to the injectors, CAS and ignition.
I mesured the outputs with DVM.
P259ch0=16v
5v+ 4.96
tps supply 4.96
primary trigger 4.3v
sec trigger 4.78v
Loaded the new 1.1.50 fw on to the vems box but didn't help.
I think somethings dead in the box. Don't know what to do.
I have tried FW 1.1.18 and 1.1.44Alpha2 but same error.
The box did work with fw 1.1.18 and 1.1.44Alpha before it stoped reacting when i was driving.
Answers: