This page is about installing VEMS on my BWM 325iX, it's based on the E30 chassis and was manufactured in 1989. It's got AWD (the X in the model name) and here is [an old picture of the AWD beast].
![[an old picture of the AWD beast]](http://savarturbo.se/~mattias/motor/pictures/ix/my_bmw325ix_640.jpg){kind=link}
My V3.1 board
Progress report:
- Found rescue kit 1 (don't ask)
- Shorted F1 and soldered the big coil on L3
- Added low-voltage flyback diodes
- Flyback wire to EC36-pin22
- VR on primary trigger (Emil made a small Eiffel tower for me)
Issues left:
- The stepper chip, will research more on GenBoard/BuildProcedures/Stepper
- Update firmware
- Test all outputs
- Mount in Alubos case