The car is a BMW Bavaria 3.0S from 1976, chassis model is E3.
Below are details on the install of a VEMS Genboard on the engine.
Engine information
- Stock M30B30, a 3.0 litre inline 6 cyl with 180 hp with stock carburators
- Fuel injectors are 6 x 380 cc, high impedance from E34 M5
- Ignition system uses a single coil and distributor
- Stock coolant temperature sensor is ok for use with the Genboard
- Potentiometer style TPS
- Custom intake air temperature (IAT) sensor mounted just after the throttle plate, sensor is NTC from web shop
Plans for Genboard control
Custom harness
- Electric fan
- Idle air solenoid
- Sequential fuel injection
Trigger setup
60-2 wheel from a modern M30 (BMW E34 535 -91) with stock VR sensor.
Genboard configuration
To come.