We're investigating an engine setup
First we would want to confirm that trigger is 48+1 (unmodified LS1 with 24 tooth on crank without missing tooth), as on:
Triggerlog
- capture triggerlog during cranking with normal coil type
- or perhaps auditrigger divby1 (although this is less tested)
Auditrigger divbyN N>1 does not log the skipped teeth (desirable with c270 and similar trigger), as seen below:
Note: captured with auditrigger divby2 so the missing tooth might be "optical illusion" :
What sectrig edge was this captured with ? Can you capture triggerlog also with the other sectrig edge ?
(primtrig is most certainly falling edge => which results in evenly spaced primtrig pulses).