Subpage of MembersPage/MarcellGal/WoodGasifierEngine
Crysler Magnum 5.2L V8 engine wiring. Some parts are in Hungarian
ignition output - currently using 1 distributer
Ignition coil primary is connected between:
- EC36/36 (not 26 !!!!!!!!!!!!!!!!!!!!!!) ign coil-
- +12V
Fuse (BiztosÃték fontos!): 4-7.5A
Sensors
- primary trigger HALL (8 window on crank), EC36/27
- secondary trigger HALL (1 window on cam), EC36/13
- internal MAP (csovel csatlakozik a MAP)
TPS sensor
- EC36/1 TPS signal (this was only wrong in the sent .xls or connected wrong ?)
- EC36/29 TPS +5V
- EC36/26 TPS ground (signal GND)
Stepper outputs
coil1: (resistance= ?)
- EC18/..
- EC18/..
coil2: (resistance= ?)
- EC18/..
- EC18/..