| 1989 Porsche 944 Turbo 2.5 8V |
CONTROLS + Sensors
- VEMS V3.3 Firmware 1.2.38
- Onboard 300kPa MAP sensor
- Ordered as VR trigger, converted to hall
- Cherry/ZF electronics GS100102 Hall effect crank sensor, 1.5mm gap
- Audi hall sensor as cam sensor
- OEM clt sensor
- Fuel pressure sensor
- oil temp sensor
- Wheelspeed from gearbox
- E85/98RON Mapswitch
- Analog Input Multiplexer
- 2x EGT onboard + 2x EGT amp
- LSU 4.9
- OEM Bosch knock sensor
- Pre compressor temp + pressure
- Pre IC pressure + temp
- Post IC pressure + temp (IAT)
- LCD
- New engine harness utilizes OEM breakout connectors + fuses and controls OEM relais
CAR
- Bosch 0 280 158 040 980cc/min injectors @ 4bar (~1120cc/min)
- Pierburg fuel pump 7.00228.51.0
- Bosch 0 280 160 263 4 bar fuel pressure regulator
- modified flywheel with 60-2 trigger and -55% inertia compared to stock
- 3" from turbo with 100cpsi catalytic and modified stock muffler
- piston oil squirters
- 100.5mm Wössner pistons
- closed deck block modification
- Stock RARST rods
- Stock Head + NA cam
- NGK BPR7E sparkplugs on E85 @ 0.5mm gap (was BPR8E on high boost + 98RON)
- BorgWarner EFR7163 Twinscroll IWG with custom x-over pipe
- 6spd Audi TDI gearbox swap
- 597060 wasted spark ignition coil
- Nissan Quest Alternator swap
- Sachs Performance clutch