Dear all.
I am using the last stable version of vemstune 1.4.9 (2013-02-15) with firmware 1.2.11.
There is message vemstune older than firmware.
I saw on uk forum that this is not a problem with this version of firmware.
do you confirm that there is no risk of side effects ?
otherwise
What are all the versions of vemstune are compatible ?
What are all the firmware fully compatible with vemstune 1.4.9.
- VT versions are compatible with existing (at the time of VT release) 1.1.x - 1.2.x (primarily: released firmwares), but
- might not be compatible with any firmwares nonexistant at the time of VT release. If in doubt, use [vems.hu/vt released VT] or, eg. before reporting a problem that might have been fixed, you might try latest from http://vems.hu/download/v3gui/dev/
I raise that question because on audi motronic55 v3 adu I never had any problem but on audi 3b engine motronic55 v3 I have a lot of problem with engine unable to go above 2000rpm.
- this is almost certainly not vemstune incompatibility
- what type of error is flagged ? too few primtrig ?
- the ADU and 3B trigger system is identical "c270" type:
- 135 tooth primtrig-VR (polarity matters ! Maybe it wasn't inverted ? (or accidentally inverted twice ?). Maybe the problematic has special 7A flywheel that has some ghost-teeth ? Detailed trigger-diagnosis would be needed (preferrably with DVM + scope + logging with VT).
- sectrig=auditrigger: 1 tooth crankhome-VR, and 1 cam-HALL window
A: There are no compatibility issues between 1.2.11 firmware and any VemsTune version. So yes, this VemsTune version is compatible