Lexus - 300 2JZ ge VVTi engine...
v3 ECU 8291...
Files (configs, logs... see FileArea how to upload, stick to MembersPage/LexusVvti dir and subdirectories):
http://vems.hu/files/MembersPage/LexusVvti
Triggerlog captured with retarded campos (unless noted in the filename)
Reviewed configuration and tested functionality, have applied safe defaults in several locations (there were weird values in many places, "Validate" warned about it. Updated configuration:
Trigger
- primary trigger: 36-2
- VR
- secondary trigger: 3 tooth on cam
- VR
VVTI actuator
- Intake cam
- 1 coil
- Exhaust cam no VVTI
- From the triggerlog we assume only intake cam has position sensor (and VVTI)
it is PWM two pins
trigger error
sync is working (2013-11-06 logs), vems see rpm but is less secondary trigger error im make log and trigger log
- uploaded new logs
- was the new recommended config used for this ?
- check in sectrig dialog: "ignore sectrig tooth above" = ... value 10 ?
Have reviewed latest logs for proper operation stay with firmware 1.2.11 (downgrade your firmware from 1.2.17 to 1.2.11). Also apply the full configuration not just the trigger section. Several potential other problems have also been corrected.
After this please try again and report - DB