have a problem with idle . the car is a peugeot 306gti xu10j4rs.
some who knows how I get the idle to work.??
tried almost everything ;-(
More exactly ?
- First, verify connections, The stepper pins are on EC18 (not EC36)
- the default setting assume the coils are between A-B and C-D (not A-D and B-C). It can be configured either way, but you have to watch out for this.
- measure resistance of the 2 coils inside the stepper motor. Take note of the pair of pins.
- try VemsTune iac-lock feature
- if it reacts to iac-lock (higher and lower positions: take note if the direction is correct or reversal needed), than reference position and tuning can be started
- if it does not react to different iac-lock positions, disconnect the stepper motor and do output tests for all 4 outputs. Measure with DVM (20V DC mode) from GND and also from 12V (as a base).
- document your measurements exactly (here is fine)
log: http://www.vems.hu/files/MembersPage/Lean/v3.3_u003785-2011.07.15-23.45.53.vemslog