Hi Guys!
I own a '93 Audi 100 S4 2.2 Turbo Quattro. (Engine : AAN)
I got it installed cause I wanted to have the possibility to tune the engine management as I want, instead of factory installed stuff which is a "black box" for an average carfun.
It will be fine but now I do have problems :
starting
- first of all, your warm cranking pulsewidth (cwh) is way too high. See MembersPage/MarcellGal/PowerAndTraction/FuelDelivery ... instead of 17 / 11 msec (warm/cold), try 17/6 msec
- Engine stops 3 sec. after starting if I do not press the accelerator
- typically this means that afterstart enrichment is not good (and often warmup is not perfect either)
- take logs ! Upload to FileArea
ignition
- how to know what to enter... ? I have to learn.
- see MegaTune help and tuning-guides
- read MembersPage/PhatBob/UserGuide
- board computer : fuel consumption and boost display do not work yet
- we'll need some testing for this, to find out what voltage the trip computer needs. Hopefully the bad HALL sensor (now distributer half-disassembled, preventing operation at the moment) on MembersPage/MarcellGal/PowerAndTraction/InputTrigger is fixed soon.
Br, Laszlo
mail : nospam_lacus007 at yahoo dot com
nospam.laszlo.horvath at sanmina-sci dot com