Trigger setup
Primary trigger
- 36-1 VR on crank
- VR sensor measured resistance= ?
- (not the InputTrigger/LanciaCosworth)
- VR wheel is home-made, 1 tooth is simply missing. This is non-standard, means pulse before and after the missing tooth is bigger
- this requires some attention with adaptive hysteresis
- measure how ECU tolerates different tooth-pulses
- R181=150k ?
- R30=22k pullup to +5V\n
primary_trigger=01 secondary_trigger=02 tooth_wheel=2D # TDC is appr. 80 crankdegrees after the tooth after the missing tooth trigger_tooth=02 ign_tdcdelay=78 # 60 crankdeg
Secondary trigger
- optional (not needed for wasted spark)
- not included in the harness (originally was VR 2 pulses on cam, as on InputTrigger/LanciaCosworth)