Project VW Passat VR6
Test Vehicle for VEMS V3.3
VAG VR6 6 cylinder engine
60-2 VR crank trigger
1 Window hall cam trigger
NTC temp sensors
Standard TPS
2 OEM Knock Sensors
High Z Injectors
Waste Spark Coil With Ignitor
2 wire PWM Bosch Idle Valve (min/closed duty ~25%)
Current Order:
- 1-wire interface: NO
- Ignition driver: 4+4
- in oID=1328 you seem to have - ignition driver: 8 (is that intentional?)
- IMHO 6+2 would make most sense (=> the most versatile), that is 6 power outputs and 2+4 logiclevel (together with the 4 stepper, that can also be used for ignition).
- oops, I meant 4+4 Ign drivers(replied to e-mail)
- Knock and EGT: Yes (2 knock,1 EGT)
- LCD and PS2: Yes
- MAP connection: Onboard 250 KPA (emailed about 400 kpa)
- PowerFlyback: High Z Injectors, do I need flyback?
- Primary_trigger: VR (60-2 wheel)
- Secondary_trigger: HALL (one window)
- Lower (than 510 Ohm) resistors for i259 logiclevel outputs for use with VAG 1.8T COPs
- OEM Bosch temp sensors (pullup needed?)