fw 1.1.90, VemsTune 4-26-2011
IAC Retard was activated during a full throttle pull, causing 10 degree loss of advance.
Repeated issue on next log with idle retard set to "0" - IAC flag still active.
- iac TPS threshold should be the key here
- So all IAC functions should be OFF above 1% TPS in this case, right?
- What is strange about these logs is that the car ran thru 1st and second gear with no IAC, an then 3rd gear the IAC turned on.
IAC Close minmap set to 86kpa
(Which I assume closes and/or shuts off all IAC functions above the setting of 86 kpa) - "Iac close position" is set to "0".
We'll check 1.1.90 and 1.1.91 (note that both are unreleased) and reproduce the setup. Thanx for the vemslogs and precise position information !
Log 19.13.26 - 58 second mark - IAC ON during 2nd gear pull (idle retard set to 0)
http://www.vems.hu/files/KevinBlack/v3.3_u003505-2011.04.28-19.13.26.vemslog
Log 18.46.08 - 24 second mark - IAC is ON in 3rd gear, pulling 10 degrees of timing out
(Timing is 16.5 degrees in 2nd gear, and 6 degrees in 3rd gear, IAC flag is ON)
http://www.vems.hu/files/KevinBlack/v3.3_u003505-2011.04.28-18.46.08.vemslog