http://www.vems.hu/wiki/index.php?page=MembersPage%2FKamuto
e92 drift car with vems and motec stuff + bmw s54 engine.
vems v3 on bmw s54 with vanos done that no questions.
motec c125 dash
http://www.motec.com.au/c125/c125overview/
Communications
2 x Configurable CAN buses with individually programmable CAN bus speeds
One can be used as RS232 Receive
RS232: 2 x RS232 ports
One with Transmit and Receive
One with Receive only
dash can be customised any way, both for can recieve and transmit, rs232 can be custom too as I understand
motec PDM30
Communications
1 x CAN
Has
Outputs: 30
Inputs: 16
inputs can be used as switches for activating outputs from vems or simple switch.
fuel pump, main relay.
pdm can bus can be fully customized both ways.
1.
the goal is to feed can bus to these 2 devices, to control fans, water pump, oil cooler fan, fans with pwm based on coolant temp and so on :)
2.
feed Vems can bus data to C125 display, main parameters + oil pressure, fuel pressure, and oil temp is a must.
the ways to do it?? aim2can? other hw?