e92 drift car with vems and motec stuff + bmw s54 engine.
vems v3 on bmw s54 with vanos done that no questions.
motec c125 dash
http://www.motec.com.au/c125/c125overview/
Communications
2 x Configurable CAN buses with individually programmable CAN bus speeds
One can be used as RS232 Receive
RS232: 2 x RS232 ports
One with Transmit and Receive
One with Receive only
motec PDM30
Communications
1 x CAN
Has
Outputs: 30
Inputs: 16
inputs can be used as switches for activating outputs from vems or simple switch.
fuel pump, main relay.
pdm can bus can be fully customized both ways.
[url=http://postimg.org/image/oc66i83jf/][img]http://s9.postimg.org/oc66i83jf/pdm_can_bus.png[/img][/url]
![http://postimg.org/image/oc66i83jf/][img]http://s9.postimg.org/oc66i83jf/pdm_can_bus.png[/img][/url](http://postimg.org/image/oc66i83jf/][img]http://s9.postimg.org/oc66i83jf/pdm_can_bus.png[/img][/url){kind=link}
[url=http://postimg.org/image/icifekiqz/][img]http://s9.postimg.org/icifekiqz/pdm_can_bus1.png[/img][/url]
![http://postimg.org/image/icifekiqz/][img]http://s9.postimg.org/icifekiqz/pdm_can_bus1.png[/img][/url](http://postimg.org/image/icifekiqz/][img]http://s9.postimg.org/icifekiqz/pdm_can_bus1.png[/img][/url){kind=link}
1.
the goal is to feed can bus to these 2 devices, to control fans, water pump, oil cooler fan, fans with pwm based on coolant temp and so on :)
2.
feed Vems can bus data to C125 display, main parameters + oil pressure, fuel pressure, and oil temp is a must.
the ways to do it?? aim2can? other hw?