so story.
subaru 6-7 trigger, first started with oem wiring loom + loom adapter to vems.
cold engine +- ok, hot engine many trigger errors, loosing sync on boost. replaced trigger to 36-2-2-2.
no errors but engine performs poor on boost, lot of noise. swaped trigger back, no problem with stock ecu 320hp on 1 bar
logs with vems stock trigger cold engine
stock trigger hot engine
replaced ignition coils to new ones from newer 2.5 engine these have internal ignitor.
it got better, but still no good
this is scope shot when it gets less primary trigger
this is jumper set on probe to lover signal by 10 times
this is how it looks on idle
