I have Genboard 3.3 (1.0.53) installed on my car, and i have some problems with those .bat files installed on my computer.
When connected to car, download-config.bat works fine, but when running generate-config.bat it doesn´t work right.
Tables.mtt is generated ok, but config.mtt have ERROR text first on every line.
At the end it says Config.mtt generated with 255 errors and 0 warnings.???
- check your downloaded config.txt in /config that it is correct
- check your /firmware that is has correct global.h in it
- if previous doesn't give any results, download new VemsMT release and replace old makeconfig.exe with the one from new package
Tried with new .exe file , but still the same...
at what com-port is your laptop communicating with genboard?
when this is another com-port as the bat-file uses then you have to edit the batfile with a texteditor to adjust its com-port. Tim
Edit your config.txt with Programmers notepad, Do not use windows notepad. There is note about this in here somewhere on wiki.
I had similar problems because windows notepad somehow mixed up config.txt and give multiple errors when trying to generate config.
Then finally editing with Programmers notepad there was many lines containig text from multiple lines.
I separated texts to their own lines, saved and everything worked OK!