This is what I think I will need (plus some extras for the future).
Box:
- 1 x Alubos EC Frontplate. I recommend transparent
- 1 x Alubos Endplate. I recommend transparent
- 2 x Alubos Gasket.
- 1 x Alubos 1600.
- 2..3 x Clamping Plate. 2 is the minimum for 5 FET + 4 IGBT, but 3 is not too many (especially if using extra switches for extra functions)
- 1 x Econoseal18-PCB.
- 1 x Econoseal36-PCB.
- 1 x Econoseal18-Wire.
- 1 x Econoseal36-Wire.
- 1 x GenBoard v3.x
- 5+ x FET: FQPF20N06L. (one for WBO and four for injectors. Any spare? Often very useful for extra functions.)
- 4+ x Ignition IGBT. (one should do, but for future COP i'll need four, right?)
- 1 x MPX4250AP.
- 1 x AD597AR.
- 1 x NTC 2k2.
- 1 x TPIC8101DW.
- 1 x WideBandO2 Sensor.
- 1 x Wideband Connector.
- 1 x K-thermocouple.
So... The big Q, have I missed something?