Hi.
My name is Joel Zernask and I live in Tallinn, Estonia.
I am currently building my '86 Audi Coupe Quattro. Originally it had a 2,2 10v 100kw engine, which was swapped for 2,3 20v 125kw engine approximately 4 years ago. Since there is never enough power and since I'm addicted to V8 engines, I decided to swap the R5 for a V8. I didn't want to go for 2,2 20vT because I had an S4 with that engine and got fed up with turbo lag. I'm very happy with the 4,2 S6 I currently have.
For the CQ I chose 3,6L V8 instead of 4,2 because the racing classes in Estonia brake at 4000 ccm and that 4,2l engine would put me in an unfair disadvantage.
Pictures of the swap project can be seen here -> http://www.motorgeek.com/index.php?page=4&set_albumName=Joel-Typ85-CQ-V8&page=4&op=modload&name=mx_gallery&file=index&include=view_album.php
I first thought to stick with an OEM Motronic and distributor ignition, but one of the distributors interferes with the brake booster and the OEM Motronic is no good anyway tuning wise. So I started to search for EMS's and currently I have decided that VEMS is the best option for me.
I will no go with direct ignition. According to very much appreciated guidance of Jörgen Karlsson, I'll remove the interfering distributor and leave the other only for home signal. I have added three more pins in addition to the OEM #1 TDC pin to the flywheel, so this should get the Genboard v.3.3 running.
If I understand right, you will use wastes spark. Good. Do you already have the transformer choice ?
I plan to place the order for VEMS stuff this on next week and here's my tentative shopping list:
VEMS Genboard v.3.3 (assembled and clamped) EUR448,60 options:
- 8 ignition drivers EUR19,80
- check that your ignition module/transformer needs power inputs, not logic-level inputs. For 8 cyl wasted spark, the 4+4 can be a safe option (allows either type)
- knock and EGT EUR24,80
- LCD and PS2 keyboard EUR19,80
- Power-flyback EUR36,70
- (this I do not know yet). What injectors do you plan to use ?
- Primary trigger: VR
- Secondary trigger: Hall
- 250kpa onboard MAP sensor (6x4mm) EUR39,80
Other items:
- Econoseal36 harness EUR48,80
- Econoseal18 harness EUR34,40
- Wideband O2 sensor EUR57,70
- Wideband O2 sensor connector with wires EUR14,60
- EGT sensor EUR59,70 (this I also do not know whether I need)
Total: EUR804,70
If anyone spots anything wrong or missing in this list, any attention would be much appreciated.
All the best to you,
Joel Zernask.
_______________________________________________________
Thank you MarcellGal for your comments. I'll answer your questions below:
Q: If I understand right, you will use wastes spark. Good. Do you already have the transformer choice?
A: I think I'll go with the Ford EDIS coil packs, if this is what you meant...
Q:* 8 ignition drivers EUR19,80
- check that your ignition module/transformer needs power inputs, not logic-level inputs. For 8 cyl wasted spark, the 4+4 can be a safe option (allows either type)
Q: * Power-flyback EUR36,70(this I do not know yet).
- What injectors do you plan to use ?
Best regards,
Joel.