Audi 10VT engines in historic rally in Group B
[www.frontbage.se Jobparts Ab] is building many cars for rally and some for road.
Fredrik from Stockholm... Original factory ECU was (35 pin?) and orange color... New ECU box MUST be painted orange ...
- exact color: RAL... ?
- or at least a photo of ECU ? (not the car!)
Trigger setup ? Auditrigger ?
- primtrig=VR 135 tooth
- sectrig=auditrigger crankhome VR=1pulse, and camhall 1 pulse ?
- is that correct ?
I think that "cart" could be a starting point:
- NTC type MAT sensor
- LSU4 sensor
- maybe EGT sensor ??
- VEMS ECU (EC36+18 version, box painted orange...) with VR, Auditrigger, 400 kPa internal MAP sensor and 6 IGBTs
- v3-twinshieldharness I6
But to proceed someone local (in Stockholm) would be needed to do on-site verifications / measurements, and cooperate with remote assistance (whoever that be).
At this moment I can order at least 3 boxes with all parts and 5 cables looms if that helps.
If econoseal version (as it seems now) it's "almost standard", no "set-up costs", so 1 initially is probably best to see that it fits as you like (or if any changes needed).