Switching to Genboard on my Golf racer, because K-Jet isn't cutting it. Later on I will be doing forced induction, so I need room for change.
Pictures and some info:
http://proton.shadowflux.com/vwracing/
email james at shadowflux dot com
Logging Q:
mde02log.pl logs WBO2 activity.
- Is there a Perl script to log exact data from all variables? MegaTune's logs are far less than precise (eg. 1590 RPM is logged as '15').
- no such log_runtime.pl currently. It would be relatively simple (start from wbo2log.pl) except that the runtime log has no exact framing. Frame-boundaries are found with heuristics, look at megatunix code for how it is done. The firmware automatically spits out log-bytes after a command thing like "Manmde40byeA" (TODO: verify).
Config
Latest/revised comments config: MembersPage/JimW/Config
Notes about subsystems (to verify/justify config variables) on pages below
- MembersPage/JimW/FuelSystem
- MembersPage/JimW/InputTrigger
- MembersPage/JimW/IgnitionOutput
- MembersPage/JimW/AirFeed
- MembersPage/JimW/Wiring
- MembersPage/JimW/Sensors
My Genboard and LCD display:
