Next project will consist of installing a S52 engine in my 1990 E30
Engine consists of
3.2 Liter Straight 6
24 Valve, DOHC with VANOS (Variable Intake Timing)
COP Ignition
Will be adding a turbo at the time of installation
This project is in the very early stages
Update the car is running! and runs great. I will be back to update my configs, etc.
The Car
The Engine
Wiring Diagram
Triggers (cam/crank)
General Issues
Config / Tables
Vanos Discussion
Econometer Turbo Gauge
Questions / Issues:
1. The board powers up! and i have LCD and keyboard, and some of the sensors seem to be working properly. Although I'm having an issue with the rs232 port. I confirmed wiring, and even double checked the jumpers on the board - but i still don't have a connection. I'm testing the board using MegaTune. Can somebody offer some suggestions on what to do? replace the maxim chip? Wouldn't the serial port need to be working for initial programming after the bootloader was installed? Thanks!
Solved - for whatever reason, i was able to upgrade the firmware using megaloader and the serial problem was solved.