Hi, I am 30-years old Finnish Saab-maniac and I am trying to get my project car to run with v3.3. I have started to build up a harness, I am sure I will have many questions to ask before Saab will start up :).
Here is a bit specs of my project:
Engine is B234 from -91 Aero, bored to maximum oversize (2.4L)with Holset HX40 Super and custom headers.
Management Genboard v3.3 with 4bar map, super flyback, 1st trigger in cranck, second in distributor, both 12v hall, output 5v. Going to drive ignition with Bosch wasted spark coilpack.
Fuel system handled with -044 Bosch and 998cc/min Delphi 2Ohm injectors. Going to use TS diode. Is 50w 6R8 resistors really needed with those injectors and super flyback?
Harness is almost ready, most of the sensors allready giving data, next task is trigger settings, then idle solenoid.
Can someone help with trigger setting? Here is art with Paint..
Motor goes clockwise. If I have got it right, I have to use in settings "falling", "multitooth", "TDC after trigger 45 grades". Am I right? Rest ot the setting is unknown to me :(. Help would be appreciated.