Current state:
Used MembersPage/PhatBob/UserGuide
I'm using a BMW M20 6 cylinder engine simular to MembersPage/GergelyLezsak
It uses the following sensors and injectors:
- 440CC injectors
- Stock single coil distributer
- VEMS Internal Map sensor (working)
- VEMS shop IAT sensor (values below)
- WB02 5057 sensor (working)
- Other CLT sensor (values below)
- Volvo TPS sensor (working)
- Stock VR sensor (working)
I've downloaded the [VemsMT1.0.30rc3.zip] package and updated the firmware using UploadFirmware.bat. All sensors are connected and need to be calibrated. This is where the problems start:
IAT and CLT:
[/MembersPage/JanSaenen/Tempsens]
'31-03-06'
Didn't dive into the CLT and IAT changes. Hopefully I'll get around doing that this weekend.
I did see a spark.
Next is fuel and CLT IAT calibration.
'Fuelpump'