Made my order
Cable for serial communication with the GenBoard. Use a 6.3 mm stereo jack female/male. Mount that in your dash somewhere and wire it to the serial pins on the EC18 connector. This involves building a custom serial cable to connect your computer with a male 6.3 mm plug in one end and DSUB9 female in the other end.
notebook and MegaTune to tune the ignition map.
Assembled v3.3 controller
- ignition driver 8
- Knock and 2 EGT
- LCD and PS2 yes
- MAP onboard
- primary_trigger VR
- secondary_trigger HALL
- LCD4x20 28.00EUR
- DSUBxx connector 1.00EUR (for LCD)
- EC36wire
- EC18wire
- 2x EGT sensor (K-type)
- 2x VEMS sticker
- IntakeAirTemp? sensor