Made my order
Cable for serial communication with the GenBoard. Use a 6.3 mm stereo jack female/male. Mount that in your dash somewhere and wire it to the serial pins on the EC18 connector. This involves building a custom serial cable to connect your computer with a male 6.3 mm plug in one end and DSUB9 female in the other end.
notebook and MegaTune to tune the ignition map.
Assembled v3.3 controller
ignition driver 8
Knock and 2 EGT
LCD and PS2 yes
MAP onboard
primary_trigger VR
secondary_trigger HALL
Other items:
LCD4x20 28.00EUR
DSUBxx connector 1.00EUR (for LCD)
EC36wire
EC18wire
2x EGT sensor (K-type)
2x VEMS sticker
IntakeAirTemp? sensor