- ) first time i work with WIKI, well see how this works out
My plan is to run VEMS V3.3 fully integrated on the stock harness. Vems will be atached through a short adapter harness. the only stock sensor that I'm npt going to use is the stock HALL.. I will install a 36-1 trigger from Ford, on the crank.
Here is a picture of the powerplant.
http://www.vetteforum.org/attachment.php?attachmentid=1138&d=1087455785
Next Question:
My HEI module need a +5V signal to work.. If you cut this signal, you can adjust base spark advance.
Is it possible to use pin 28 for this, I have no clue what the amp is needed??