My plan is to run VEMS V3.3 fully integrated on the stock harness. Vems will be attached through a short adapter harness. All stock sensors will be used.
Here is a picture of the powerplant.
http://www.vetteforum.org/attachment.php?attachmentid=1138&d=1087455785
MembersPage/JakeCederblad/VRtoHALL
2006-06-03
Genboard hooked up. After some problems all sensors work fine and fuel also work. I have not tried IAC.
ENGIEN WON'T START..
Next Question:
NO spark!
When i use HEI bypass i get spark! HEI bypass decribed here
But when HEI is in "normal mode" it won't fire. There is a triggersignal from genboard (I think 0-5V pulse), So why is this oulse not enough to fire the HEI module? Does the HEI-module require some diffrent kind of signal?
Spark advance is set to 96 degrees. Is this right, V8 with 4 point HALL, and 6 degrees pre advance??
To do:
GET HEI to work with genboard.