- ) first time i work with WIKI, well se how this works ut
My plan is to run VEMS V3.3 fully integrated on the stock harness. Vems will be atached through a short adapter harness. the only stock sensor that I'm npt going to use is the stock HALL.. I will install a 36-1 trigger from Ford, on the crank.
Here is a picture of the powerplant.
http://www.vetteforum.org/attachment.php?attachmentid=1138&d=1087455785
The current problem i have now is that i don't have any idea how to attach the IAC motor to VEMS.
Here is a picture of the IAC, the left one
And the pinout is the bottom one in this picture
Does anyone have a Pinout for this kind of IAC?? Or does any idéas how to pin them togeather..