BMW m50b20tu vanos motor Code 20 6S2 (oid16217 )
ECU VEMS V3 (8IGBT , VR, HALL)
- note: originally VR, VR
- yes, weird, but Siemens ECU had VR cam-input and camsensor was VR verified by Ohm measurement
- the Vanos head cam-sensor is usually HALL from the factory (the non-Vanos head cam-sensor is VR, here irrelevant)
- camsensor replaced to HALL Ref: 12 14 1 438 081
- ignition driver: 8
- primary_trigger: EC36/27 VR
- secondary_trigger: EC36/13 HALL ( finally replacement HALL sensor Ref: 12 14 1 438 081 )
- Knock input channels: 2
- EGT input: 1
- MAP connection: 400 kPa simplenipple
- additional Low-side NFET outputs: 4
- Hi-side PFET outputs: 0 Ok for NFET
- ETC BridgeOutput?_Interface: 0
- Flyback: HighZ-only 30V flyback
- LCD connection: no
- withSDcard: no
- 1-wire interface: no
______________________________________________
-DME : Siemens MS40.1
-PHM : OEM Siemens VR 1730027
-PMH Siemens resistance between wire 1 and 2 : 12.5 Ohm
-PMH Siemens resistance between wire 2 and 3 : 0.3 Ohm
-Camshaft : HALL Ref: 12 14 1 438 081
-Injector : 630cc Deka 12.5 Ohm
-Ignition : OEM Bremi 1 703 360
-Stock air mass meter removed
-Vehicule speed : OEM Bmw E36 on differential