Im hoping this will serve as a useful place to store results of using vems on various spec 4AGE engines.
I keep most pictures and suchlike on a photobucket page which Ill cross link for now until I become more used to the wiki interface.
Heres latest install
16v 4AGE
272/7.5mm lift cams
Stock head, stock valves
Wiseco forged hi comp pistons
40mm ITBs, 4-1ex manifold, 2" race exhaust.
295cc injectors
Video of startup before cams were dialled in, rough startup map from another 4AGE (I think).
Car is not mapped.
Click this video link to see car idling for first time :D
After mapping:
Torque Graph vs RPM Bins
HP graph vs RPM bins
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Heres second latest install
16v 4AGE
312/11mm lift cams
40mm ITBs, 4-1ex manifold, 2" race exhaust (2box).
295cc injectors
RMSport prepared cylinder head, Big valves
Video link of car starting after cams dialled in to 100/100.
Optimum TRD specs are 102/102, but leaving it to dyno tuner to
find optimum based on rolling road results.
Click this video link
____________________________________
APRIL 2009
KP61 Toyota STarlet With 20v4AGE, uprated cams, pistons etc.
Mucho thanks to PhatBob for answering my SMS messages over the holidays, one penang and beer coming your way!
Work over the holidays:
264/9mm TODA Cams dialled in to
INTAKE Max lift at 106
EXHAUST Max Lift at 116
Follow Loom Guide to start car...RTFMFTW!
First start
Second start
We are now faced with the usual problem of trying to find a tuner Who will map the engine when the software is so poor compared to Emerald,GoTech etc