MembersPage/HansK (2005-11-16 14:38:20)

Hallo I am from Denmark and I installed a V3.2 in my VW Golf GTI 8V.

MembersPage/HansK/IgnitionSetup

MembersPage/HansK/EgoReadingProblems

MembersPage/HansK/History


2005.11.16

I finaly got time to get idle to work.. and it dos!! :)

I just got a question about some settings:

What does "iac_conf RAW" do?

And how does "IAC afterstart, step per 160rpm" work? I see GergelyLezsak has "0"..?


2005.08.15

Update.. After I have done some better sealing around the hall-sensor, and opgraded the Gnd-wiring (which chanced the ignition-timing, so it must have bee bad :0 now the ign.-map looks more like I would expect it to) problems seem to bee gone but i have not tryed really bad weather yet.

Q. I added a bottom that grounds the TSP, so i could use ALS to make a lower revlimit when starting, but it don't seem to work?? (I use firmware v13rc5) Any ideas why it don't work?

Q. I read about useing fuelcut as a "launch controle", but how does it work, and does it have a revlimit?