2006.09.13
I'm planing to install/enable Launch controle and Shift cut on my VW golf running VEMS V3.2
I have tested it on a V3.3 board with firmware/MT 1.0.53 using input channel 6 and 7 (mcp3208 + two 10KOhm pullup), and it seems to work :-)
Here is the external wiring I'm planing.. a contact under the clutch and one on the steeringwheel, or where i'll find it convenient, to activate launch insted of shift-cut.
Suggestions fore shift-cut
- a "minimum rpm" (at the moment the clutch is pressed) so the shift-cut function is disabled when your not racing the car.
- maybe a "max rpm" and "controle range (shared)" (soft rpm limiter) that's on as long as clutch is down, as a alternative to the "time-based" 100% ignition-cutting. Just a thought.. haven't tryed it.