This is my little VEMS section where I will discuss how I´m using
the VEMS.
I´ll be using vems for mostly bmw´s but will also use it on whatever people want me to install it on.
I´m going to try and have all projects in their own pages,
and then discuss their install issues and solutions.
Project #1. Completely assemble and test all functions on a VEMS V3.3 board, then build wiring loom for install into a M20 based E30 car. Same setup would work on a M30 based E30 car as I will build the loom so sensor connectors are easily movable to accommadate
diffrent sensor locations. MembersPage/StartHere
GunnarReynisson/88Pin